Differences

This shows you the differences between two versions of the page.

--- faduino:index [2026/02/16 05:11] – [Single-Body FADUINO] admin
+++ faduino:index [2026/02/17 04:21] (current) – [Single-Body FADUINO] admin
@@ Line 1: / Line 1: @@
+++++[AI Metadata]|
+FADUINO-18TA is a board-type industrial controller based on the ATmega328P microcontroller.
+Memory: 32 KB program memory, 2 KB SRAM, 1 KB EEPROM.
+Serial ports: RS-232 = 1 port, RS-485 = 0 ports.
+I2C: 0 ports.
+Digital inputs: DC 24 V input = 8 channels, interrupt input = 0 channels.
+Digital outputs: NPN transistor output = 4 channels, output rating = 24 V / 100 mA per channel.
+GPIO (5 V): 6 pins (shared with ADC).
+Analog inputs: 0–5 V = 6 channels.
+PWM outputs: 0 channels.
+Power: DC 12–24 V, typical current consumption = 0.1 A.
+Certification: None.
+FADUINO-32TA is a board-type industrial controller based on the ATmega2560 microcontroller.
+Memory: 256 KB program memory, 8 KB SRAM, 4 KB EEPROM.
+Serial ports: RS-232 = 2 ports, RS-485 = 1 port.
+I2C: 1 port.
+Digital inputs: DC 24 V input = 16 channels, interrupt input = 2 channels.
+Digital outputs: NPN transistor output = 14 channels, output rating = 24 V / 100 mA per channel.
+GPIO (5 V): 6 pins (shared with PWM).
+Analog inputs: 0–10 V = 4 channels, 0–20 mA = 4 channels.
+PWM outputs: 6 channels (≤ 30 kHz).
+Power: DC 12–24 V, typical current consumption = 0.2 A.
+Certification: None.
+FADUINO-12RA is an enclosed-type industrial controller based on the ATmega2560 microcontroller.
+Memory: 256 KB program memory, 8 KB SRAM, 4 KB EEPROM.
+Serial ports: RS-232 = 1 port, RS-485 = 0 ports.
+I2C: 1 port.
+Digital inputs: DC 24 V input = 8 channels, interrupt input = 0 channels.
+Digital outputs: Relay output = 4 channels, output rating = up to 10 A per channel (recommended ≤ 3 A).
+GPIO (5 V): 0 pins.
+Analog inputs: 0–10 V = 4 channels, 0–20 mA = 4 channels.
+PWM outputs: 0 channels.
+Power: DC 24 V, typical current consumption = 0.2 A.
+Certification: CE.
+FADUINO-24RA is an enclosed-type industrial controller based on the ATmega2560 microcontroller.
+Memory: 256 KB program memory, 8 KB SRAM, 4 KB EEPROM.
+Serial ports: RS-232 = 2 ports, RS-485 = 1 port.
+I2C: 1 port.
+Digital inputs: DC 24 V input = 16 channels, interrupt input = 0 channels.
+Digital outputs: Relay output = 8 channels, output rating = up to 10 A per channel (recommended ≤ 3 A).
+GPIO (5 V): 0 pins.
+Analog inputs: 0–10 V = 4 channels, 0–20 mA = 4 channels.
+PWM outputs: 0 channels.
+Power: DC 24 V, typical current consumption = 0.4 A.
+Certification: CE.
+++++
 ====== Single-Body FADUINO ======
 [[product_warning:index|Warning]]
-The FADUINO is an Arduino(("Arduino" name and logo are trademarks registered by Arduino S.r.l. in Italy.)) compatible industrial controller. If you are starting a new project, please select Modular FADUINO. [[modularfaduino:index|Modular FADUINO]]
+The FADUINO is an Arduino(("Arduino" name and logo are trademarks registered by Arduino S.r.l. in Italy.)) compatible industrial controller.
 ===== Models =====
@@ Line 22: / Line 71: @@
 | Certification | None | None | CE | CE |
+^ Item ^ FADUINO-18TA ^ FADUINO-32TA ^ FADUINO-12RA ^ FADUINO-24RA ^
+| DC 24V Inputs | 8 channels | 16 channels | 8 channels | 16 channels |
+| Interrupt Inputs | — | 2 channels | — | — |
+| Outputs | NPN transistor × 4 | NPN transistor × 14 | Relay × 4 | Relay × 8 |
+| Output Rating | 24 V / 100 mA | 24 V / 100 mA | Max 10 A (recommended ≤ 3 A) | Same as 12RA |
+| GPIO (5 V) | 6 (shared with ADC) | 6 (shared with PWM) | — | — |
+| PWM | — | 6 channels (≤ 30 kHz) | — | — |
+++++[FADUINO Mechanical Drawings (Dimensions)]|
+^ Model ^ Mechanical Drawing ^
+| FADUINO-18TA | {{ :faduino:dfaduino18ta.png?nolink }} |
+| FADUINO-32TA | {{ :faduino:dfaduino32ta.png?nolink }} |
+| FADUINO-12RA | {{ :faduino:faduino12.png?nolink }} |
+| FADUINO-24RA | {{ :faduino:faduino24.png?nolink }} |
+++++
 ===== Hardware =====