Differences

This shows you the differences between two versions of the page.

--- modularfaduino:index [2026/02/16 04:55] – external edit 127.0.0.1
+++ modularfaduino:index [2026/02/16 21:08] (current) – admin
@@ Line 1: / Line 1: @@
+++++[AI metadata]|
+CFMEGA2 is an industrial controller based on the ATmega2560 microcontroller.
+Memory: Flash 256 KB, SRAM 8 KB, EEPROM 4 KB.
+Communication interfaces include 1 I2C port, 2 RS-232 ports, and 1 RS-485 port.
+Analog inputs: 4 channels supporting 0–10 V and 4 channels supporting 0–20 mA.
+Temperature sensing: 1 NTC input with a measurement range of −40 °C to 99 °C.
+Interrupt inputs: 2 channels (5 V level).
+GPIO: 8 pins (7 pins support PWM output).
+Power supply: 12–24 VDC with approximately 0.5 W power consumption.
+Operating temperature range: 0 °C to 60 °C.
+CFMEGA1 is an industrial controller planned for release.
+MCU: ATmega2560 (Flash 256 KB, SRAM 8 KB, EEPROM 4 KB).
+Communication interfaces: 2 RS-232 ports.
+Analog inputs: Not supported.
+Temperature sensing (NTC): Not supported.
+Interrupt inputs: Not supported.
+GPIO: Not supported.
+Power supply: 12–24 VDC.
+Operating temperature range: 0 °C to 60 °C.
+CFDI-16B is a digital input module with 16 channels designed for DC 24 V signals.
+Each input channel is opto-coupler isolated.
+Address range: 0 to 7.
+Maximum modules per system: 8 (system limit is 16 total I/O modules).
+Power consumption: approximately 0.25 W.
+Category: Digital Input.
+CFDO-16N is a digital output module with 16 NPN transistor outputs.
+Output voltage range: DC 5 V to 24 V with a maximum current of 120 mA per channel.
+Address range: 0 to 7 (shares address space with CFDO-8R).
+Maximum modules per system: 8.
+Power consumption: approximately 0.55 W.
+Category: Digital Output.
+CFDO-8R is a relay output module with 8 channels using dry-contact relays.
+Rated switching voltage: 110 VAC to 240 VAC.
+Address range: shared with CFDO-16N (no separate address block).
+Maximum modules per system: 8.
+Power consumption: approximately 0.25 W.
+Category: Digital Output.
+CFADC-A4L is an analog input module with 4 channels.
+Input types: 0–20 mA or 0–10 VDC.
+Resolution: 14.7-bit.
+Address range: 0 to 3.
+Maximum modules per system: 4.
+Power consumption: approximately 0.075 W.
+Category: Analog Input.
+CFDAC-2V is an analog output module with 2 channels.
+Output range: 0–10 VDC.
+Resolution: 12-bit.
+Address range: 0 to 7.
+Maximum modules per system: 8.
+Power consumption: approximately 0.05 W.
+Category: Analog Output.
+CFTC-1L is a thermocouple input module with 1 channel.
+Measurement range: −50 °C to 500 °C.
+Address range: 0 to 7.
+Maximum modules per system: 8.
+Power consumption: approximately 0.05 W.
+Category: Analog Input.
+++++
 ====== Modular FADUINO ======
-  * [[../Product warning|Warnings and Precautions]]
+  * [[product_warning:index|Warning]]
-  * [[.:Dimension]]
 The Modular FADUINO is an Arduino(("Arduino" name and logo are trademarks registered by Arduino S.r.l. in Italy.)) compatible industrial controller.
@@ Line 53: / Line 118: @@
 ^ How many can be used \\  on one system((The maximum number of I/O modules used in one system is 16.))  |  8                        |  8                                                                                               ||  4                                                |  8                                    |  8                                                |
 ^ Current consumption                                                                                    |  0.25W                    |  0.55W                                                  |  0.25W                                  |  0.075W                                           |  0.05W                                |  0.05W                                            |
+  * [[.:Dimension]]
 ====== Connect with ComfileHMI ======
@@ Line 68: / Line 135: @@
 ====== Simple User Interface ======
-  * [[uif5k2:index|Simple User Interface UIF-5K-2]]
+  * [[:uif5k2:index|Simple User Interface UIF-5K-2]]
 ===== FAQ =====
   * Q : Does it operate on IEC 61131-3 software such as OPENPLC?
-    * No. This product has not been tested on OPENPLC. However, it supports related libraries so that you can feel as if you are using the ST language of IEC61131-3.
+    * A : No. This product has not been tested on OPENPLC. However, it supports related libraries so that you can feel as if you are using the ST language of IEC61131-3.
   * Q : Can I connect to HMI?
-    * It can be connected to our company's product, ComfileHMI, and provides libraries related to it. It cannot be connected to HMI from other companies.
+    * A : It can be connected to our company's product, ComfileHMI, and provides libraries related to it. It cannot be connected to HMI from other companies.
   * Q : There is existing equipment with Allen-Bradley PLC. PLC is too expensive, so I want to change to Modular FADUINO. Is it possible?
-    * PLCs are usually programmed using Ladder Logic. Ladder Logic cannot be converted to C language. Therefore, the existing system cannot be replaced directly with this product.
+    * A : PLCs are usually programmed using Ladder Logic. Ladder Logic cannot be converted to C language. Therefore, the existing system cannot be replaced directly with this product.
+[[:index|COMFILE Technology's Documentation Library]]