COMFILE Technology's Documentation Library

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== 8-Channel DC Sink Output Module : MD-DOSI8 ======

{{ :modport:md-dosi8:md-dosi8.png?700 |}}

The Sink Output module requires two power sources. The DC 24V power source is used to drive the internal FET.

Each module has 8 channels, each with its own unique Modbus address.

^Channel ^0 ^1 ^2 ^3 ^4 ^5 ^6 ^7^
|Starting Address(base 10) |3100 |3101 |3102 |3103 |3104 |3105 |3106 |3107 |
|Starting Address(base 16) | C1C | C1D | C1E | C1F | C20 | C21 | C22 | C23 |
|Address (base 10) used by HMI (SCADA) | 03101 | 03102 | 03103 | 03104 | 03105 | 03106 | 03107 | 03108 |

===== Module ID (Modbus Slave Address) Assignment =====

On the front of the module, there is a rotary switch labeled //ID//, that is used to select the Modbus slave address for the module. When installing multiple modules of the same type, the ID for each module should be unique.

Rotary switch position 0 corresponds to Modbus slave address 10. If the ID is changed after the module is powered on, it must be power cycled for the new ID to take effect.

[[modport:index|MODPORT]]