====== CB210 ======

{{ :cubloc:cb210_pinout.png?nolink |}}
===== Introduction =====
  * The CUBLOC CB210 has 20 digital I/O ports, and 6 of them can be used as A/D input.
  * It can be connected to PC via USB for downloading and debugging.
  * There are two power supply options: External 9V power supply, and 5V USB power. A switch is provided to select the power source. 
  * Only PWMs 3, 4, and 5 are available. You cannot use PWM 0, 1, and 2.
  * You can use ports 0 ~ 13 and 16 ~ 21 for digital I/O.
  * You can use ports 16 ~ 21 for A/D input, but you must first configure the ports as input ports. For A/D input, you should supply 3.3V-5V power to AVREF port.
  * The CB210 cannot handle currents over 300mA.
  * An LED is connected to port 30. 

^ Name  ^ I/O  ^ Description                  ^
| RST | Reset |   |
| VIN  | Power Input | 5V~12V Input Power  |
| 3.3V | Power Output | 3.3V 500mA Max. |
| 5V   | Power Output | 5V 500mA Max. |
| AREF | ADC reference voltage |  |
| P0   | I/O  |                      |
| P1   | I/O  |                      |
| P2   | I/O  |                      |
| P3   | I/O  | PWM3                 |
| P4   | I/O  | PWM4                 |
| P5   | I/O  | PWM5                 |
| P6   | I/O  |                      |
| P7   | I/O  |                      |
| P8   | I/O  |                      |
| P9   | I/O  |                      |
| P10  | I/O  |                      |
| P11  | I/O  |                      |
| P12  | I/O  |                      |
| P13  | I/O  |                      |
| P14  | I/O  |                      |
| P15  | I/O  |                      |
| P16  | I/O  | ADC0 : AD Channel 0  |
| P17  | I/O  | ADC1 : AD Channel 1  |
| P18  | I/O  | ADC2 : AD Channel 2  |
| P19  | I/O  | ADC3 : AD Channel 3  |
| P20  | I/O  | ADC4 : AD Channel 4  |
| P21  | I/O  | ADC5 : AD Channel 5  |


[[cubloc:index|CUBLOC - Embedded Controller]]