====== Out ======

''Out port, value''
| //port// |I/O port number (0 to 255)  |
| //value// | Value to output to the specified I/O port (1 or 0)  | 

This command outputs a 1 (logic high) or a 0 (logic low) to the specified
Port. 

When you execute this command, the Cubloc will automatically set
the port's I/O mode to output. If using the Out command it is not
necessary to use the Output command to set the port beforehand.


<code xbasic>
Out 8,1    'Output a logic high signal on port 8. This is same as using command High 8.

Out 8,0    'Output a logic low signal on port 8. This is same as using Low 8.

</code>

[[cubloc:index#system_library:|Go CUBLOC home]]