====== Setting the jPC's Boot Device ======

The jPC can be configured to boot from the internal eMMC, a USB drive, or internal NVME drive mounted in the jPC's M.2 port.  The boot device is selected using the 2-position DIP switch next to the power connector.

^  DIP Switch Position        |^                               ^
^  1                    ^  2   ^  Description                  ^
| OFF                   | OFF  | Boots from the internal eMMC  |
| ON                    | OFF  | Boots from a USB Drive        |
| OFF                   | ON   | Boots from the internal NVME Drive      |
| ON                    | ON   | Reserved                      |