====== 8-Port DC Sink Output Module ======

{{ :moacon:cfdosi.png?nolink |}}

The Sink Output module requires two power sources. The DC 24V power source is used to drive the internal
FET.

The Sink Output Module has a wider output voltage range than the Source Output Module.
DC Output Modules can output a pulse of up to 1KHz meaning it can be switched on and off at about 1000
times per second.

===== Source and Sink Outputs =====

The MOACON Digital I/O Modules come in 2 flavors: the Source Output Module, and the Sink Output Module.

{{ :moacon:sinkandsource.png?nolink |}}

===== Installing General DIO Modules =====

General Digital I/O (DIO) modules can be installed in the 6 slots directly to the right of the CPU module in
the slots labeled "DIO". The slot in which the DIO module is installed determines its I/O port number.

{{ :moacon:moacon_cpumodule_location.png?nolink |}}

When a general DIO module is installed in position "+0" its ports will be assigned numbers 0 through 7.
When installed in position "+30" its ports will be assigned numbers 30 through 37.