Set OnRecv0 On|Off
Set OnRecv1 On|Off
Set OnRecv2 On|Off
Set OnRecv3 On|Off
At power on, Set OnRecv is On by default.
This command turns on or off the ability to receive On Recv interrupts. An On Recv interrupt occurs after data is received on the serial port AND stored in serial port's the receive buffer.
When Set OnRecv is On, the interrupt service routine (ISR) set using the On Recv command will be executed when the corresponding interrupt occurs. If Set OnRecv is Off, then the ISR will not be executed when the interrupt occurs. See also the On Recv command.
Set OnRecv1 On Set OnRecv1 Off