User Tools

Site Tools

한국어

product_warning

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
product_warning [2022/05/25 13:25]
COMFILE Technology [Caution]
product_warning [2023/02/08 10:48] (current)
COMFILE Technology [Caution]
Line 1: Line 1:
 +Thank you for purchasing equipment from COMFILE Technology, Inc.
  
 +We want your new equipment to be operated safely. Anyone who installs or
 +uses this equipment should read this publication (and any other relevant publications) before installing or
 +operating the equipment.
 +
 +====== Warning ======
 +
 +To minimize risk, you should follow all applicable local and national
 +codes that regulate the installation and operation of your equipment. These codes vary with geographic location
 +and usually change over time. It is your responsibility to determine which codes should be followed, and
 +to verify that the equipment, installation,​ and operation is in compliance with the latest revision of those
 +codes.
 +
 +At a minimum, you should follow all applicable sections of your jurisdiction'​s Fire Code, Electrical
 +Code, and the codes of the National Electrical Manufacturer’s Association (NEMA). There may be local
 +regulatory or government offices that can also help determine which codes and standards are necessary for
 +safe installation and operation.
 +
 +Equipment damage or serious injury to personnel can result from the failure to follow all applicable
 +codes and standards. ** We do not guarantee the products described in this publication are suitable for
 +your particular application,​ nor do we assume any responsibility for your product design, installation,​ or
 +operation. **
 +
 +Our products are not fault-tolerant and are not designed, manufactured or intended for use or resale as
 +on-line control equipment in hazardous environments requiring fail-safe performance,​ such as...
 +
 +  * in the operation of nuclear facilities, ​
 +  * aircraft navigation or communication systems, air traffic control, ​
 +  * direct life support machines, ​
 +  * weapons systems, in which the failure of the product could lead directly to death, personal injury, or severe physical or environmental damage (“High Risk Activities”). ​  
 +
 +** COMFILE Technology specifically disclaims any expressed or implied warranty of fitness for High Risk Activities. **
 +
 +====== Precautions ======
 +
 +Observe the following precautions before performing maintenance and inspection. Incorrect or careless operation will lead to injury or equipment damage.
 +
 +  * To prevent a breakdown of a product or a fire, ensure that the ambient environment does not contain corrosive substances such as chloride gas, sulfide gas or flammable substances such as oil mist, cutting powder, or dust.
 +  * To prevent connectors from oxidizing and to prevent electric shock, do not touch the connectors.
 +  * To prevent electric shock, turn off the power before pulling the connectors or loosening the screws.
 +  * To prevent cable damage, and to prevent the connectors from being loosened, do not put strain on the cables or pull on them.
 +  * Ensure that the input voltage is within the rated range.
 +  * To prevent product breakdown, fire, or injury, do not disassemble or alter the product.
 +  * To prevent a component from malfunctioning,​ ensure that software and parameters are correctly deployed to a new product before operation.
 +  * To prevent incorrect output or equipment damage, refer to the related documentation for more information about operating each product.
 +  * To prevent damage to the product, touch grounded metal or wear an antistatic wrist strap to release static electricity from your body before working on the product.
 +  * To prevent noise from causing product breakdown, keep a proper distance from the product when using a cell phone or communication device.
 +  * Do not install a product in direct sunlight or in a humid environment.
 +  * To prevent the temperature of a component from exceeding its tolerance, maintain a proper distance between the product and heat sources such as coils, heating devices, and resistors.
 +  * To protect a product, install an emergency stop switch and an overcurrent protection device.
 +  * To prevent an unexpected shock resulting from damage to the product and a connected component, ensure that the product is correctly and firmly installed.
 +
 +[[:​index|COMFILE Technology'​s Documentation Library]]