User Tools

Site Tools

한국어
You are here: index » logicpython » cubloc_api » setmodbus
logicpython:cubloc_api:setmodbus

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
logicpython:cubloc_api:setmodbus [2026/04/14 04:52] – mfranklinlogicpython:cubloc_api:setmodbus [2026/04/14 05:10] (current) – [Example] mfranklin
Line 1: Line 1:
 ====== SetModbus ====== ====== SetModbus ======
  
-Configure UART settings and start the LogicPython Modbus RTU slave worker.+Configure UART settings and start the LogicPython Modbus RTU slave process.
  
 ===== Syntax ===== ===== Syntax =====
Line 24: Line 24:
 ===== Parameters ===== ===== Parameters =====
  
-    * **channel**: RS-232 ''channel'' number. ''Channel'' 0 maps to UART0 (GP0/GP1) and ''channel'' 1 maps to UART1 (GP4/GP5).+    * **channel**: Serial ''channel'' number. ''Channel'' 0 maps to UART0 (GP0/GP1) and ''channel'' 1 maps to UART1 (GP4/GP5).
     * **baudRate**: Serial baud rate (2400 to 921600).     * **baudRate**: Serial baud rate (2400 to 921600).
-    * **protocol**: Encoded bit field for data bits, parity, and stop bits. +    * **protocol**: Encoded bit field for data bits, parity, and stop bits.  See the tables below. 
-    * **recvSize**: Receive buffer size in bytes (1 to 1024). +    * **recvSize**: Receive buffer size in bytes (1 to 4096). 
-    * **sendSize**: Send buffer size in bytes (1 to 1024).+    * **sendSize**: Send buffer size in bytes (1 to 4096).
     * **slaveAddress**: Modbus unit ID (1 to 247).     * **slaveAddress**: Modbus unit ID (1 to 247).
     * **coils**: Writable bit-packed coil buffer (8 ''coils'' per byte).     * **coils**: Writable bit-packed coil buffer (8 ''coils'' per byte).
Line 35: Line 35:
     * **holdingRegisters**: Writable holding-register byte buffer (2 bytes per register).     * **holdingRegisters**: Writable holding-register byte buffer (2 bytes per register).
     * **memoryLock**: lock object to synchronize Modbus memory access between the user program and the Modbus RTU slave process.     * **memoryLock**: lock object to synchronize Modbus memory access between the user program and the Modbus RTU slave process.
-    * **returnInterval**: Non-blocking delay in microseconds before sending a response (default 0).+    * **returnInterval**: Delay in microseconds before replying to a Modbus query from the Modbus master (default 0). 
 + 
 +''protocol'' bit layout: 
 + 
 +^ Field ^ Bits ^ Meaning ^ 
 +| Data bits | 1..0 | 00=5 bits, 01=6 bits, 10=7 bits, 11=8 bits | 
 +| Stop bits | 2 | 0=1 stop bit, 1=2 stop bits | 
 +| Parity | 4..3 | 00=None, 10=Even, 11=Odd (01 is reserved and raises ''ValueError'') | 
 + 
 +Common ''protocol'' values: 
 + 
 +^ protocol ^ Frame format ^ 
 +| 3 | 8N1 | 
 +| 11 | 8E1 | 
 +| 19 | 8O1 | 
 +| 7 | 8N2 |
  
 ===== Exceptions ===== ===== Exceptions =====
Line 54: Line 69:
 INPUT_PINS  = (6,  8,  10) INPUT_PINS  = (6,  8,  10)
 ADC_CHANS   = (0,  1,  2) ADC_CHANS   = (0,  1,  2)
- 
-coils           = bytearray(1) 
-discrete_inputs = bytearray(1) 
-input_regs      = bytearray(6) 
-holding_regs    = bytearray(2) 
-mem_lock        = _thread.allocate_lock() 
  
 for pin in OUTPUT_PINS: for pin in OUTPUT_PINS:
Line 67: Line 76:
     Input(pin)     Input(pin)
  
-SetModbus(0, 9600, 3, 64, 64, 1, coils, discrete_inputs, input_regs, holding_regs, mem_lock)+# Configure and start the Modbus RTU slave process 
 +UART_CHANNEL = 0 
 +BAUD_RATE = 115200 
 +PROTOCOL = 3        # 8N1 
 +BUFFER_SIZE = 64 
 +SLAVE_ADDRESS = 1 
 + 
 +coils           = bytearray(1) 
 +discrete_inputs = bytearray(1) 
 +input_regs      = bytearray(6) 
 +holding_regs    = bytearray(2) 
 +mem_lock        = _thread.allocate_lock() 
 + 
 +SetModbus(UART_CHANNEL, 
 +    BAUD_RATE, 
 +    PROTOCOL, 
 +    BUFFER_SIZE, 
 +    BUFFER_SIZE, 
 +    SLAVE_ADDRESS,  
 +    coils, discrete_inputs, input_regs, holding_regs, mem_lock)
  
 while True: while True:
logicpython/cubloc_api/setmodbus.1776142339.txt.gz · Last modified: by mfranklin

Page Tools