cfnet:cfheader:cfdac2v

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

======CFDAC-2V======

This is a DAC module that can output 0~10VDC voltage.

[[https://comfiletech.com/modular-faduino/cfdac-2v-analog-output-module/|View at our online store]].

=====Electrical specifications=====
  * DA output points: 2 channels
  * Output resolution: 12Bit (0 to 4094)
  * Output range: 0~10VDC
  * Error rate: ±0.1%
  * Load resistance: 270 ohms or more
  * Isolation: No isolation

=====Wiring method=====

{{:modularfaduino:cfdac_2vdesc.png?nolink |}}

===== Setting the module's address =====
 * Up to 8 CFDAC-1Vs can be used in one system with different address settings of 0x00~0x07.

{{ :modularfaduino:dip_sw_0x00.png?nolink |}}

=====How to use the API=====

1. <html><code>#include "CFMEGA.h"</code></html> library registration

2. CFNET object creation: ''CFNET **object name**'' =>'' CFNET ** cfnet;**''

3. Call the function(s): ''**Object name**.analogWrite();'' => ''**cfnet**.analogWrite(0, 0, 409);''

====-void analogWrite(u8 address, u8 channel, u16 data); ====
Outputs the voltage (0 ~ 10V) corresponding to the provided ''data'' value to the ''channel'' of the module at ''address''.
  * ''address'': The address of the module as configured by its DIP switch (0~7)
  * ''channel'': Channel number (0~1)
  * ''data'': 0 ~ 4094 values (0 ~ 10Vdc)

<code c>
#include "CFMEGA.h"

CFNET cfnet;

void setup() {
 }

void loop() {
 cfnet.analogWrite(0, 0, 409); //CH0 1V
 cfnet.analogWrite(0, 1, 2047); //CH1 5V
 delay(500);
}

</code>

[[modularfaduino:index|Modular FADUINO]]

User Tools

Site Tools

Page Tools