faduino:toggling_the_digital_outputs:index

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Toggling a Digital Output (FA-DUINO-18TA / 32TA) ======

The following program will periodically toggle digital output 38 along with the status LED.

<code c>
const int StatusLED = 13;
const int Sink38 = 38;

void setup() {
   pinMode(StatusLED, OUTPUT);
   pinMode(Sink38 , OUTPUT);
}
 
void loop() {
    digitalWrite(StatusLED, HIGH);
    digitalWrite(Sink38 , HIGH);
    delay(1000);
    digitalWrite(StatusLED, LOW);
    digitalWrite(Sink38 , LOW);
    delay(1000);
} 
</code>

====== Toggling an Output Relay (FA-DUINO-12RA / 24RA) ======

The following program will periodically toggle output 22 and the status LED

<code c>
const int StatusLED = 13;
const int Relay22 = 22;
void setup() {
   pinMode(StatusLED, OUTPUT);
   pinMode(Relay22 , OUTPUT);
}
void loop() {
    digitalWrite(StatusLED, HIGH);
    digitalWrite(Relay22, HIGH);
    delay(1000);
    digitalWrite(StatusLED, LOW);
    digitalWrite(Relay22, LOW);
    delay(1000);
} 
</code>


[[faduino:index|FADUINO]]

User Tools

Site Tools

Page Tools