====== Set OnInt ======

''Set OnIntx On|Off''
| //x// |0 to 3, External interrupt channel |

At power on, ''Set OnIntx'' is ''On'' by default.

This command turns on or off the ability to receive individual external
interrupts. ''x'' corresponds to the interrupt number supported by the device.
For example ''OnInt1'' is used for interrupt 1.

When ''Set OnIntx'' is ''On'' for a specific interrupt, the interrupt service routine
(ISR) set using the ''On Intx'' command will be executed when the
corresponding interrupt occurs. If ''Set OnIntx'' is ''Off'', then the ISR will not
be executed when the corresponding external interrupt occurs. See also the
[[cubloc:set_int:index|Set Intx]] command which controls external interrupts.

<code xbasic>
Set OnInt0 On
Set OnInt1 On
Set OnInt1 Off
Set OnInt2 Off
Set OnInt3 On
</code>

[[cubloc:index#system_library:|Go CUBLOC home]]