====== Set OnTimer ======

''Set OnTimer On|Off''

At power on, ''Set OnTimer'' is ''On'' by default.

This command turns on or off the ability to receive ''On Timer'' interrupts. An
interrupt occurs at every time interval set by the ''On Timer'' command.

When ''Set OnTimer'' is ''On'', the interrupt service routine (ISR) set using the
On Timer command will be executed when the corresponding interrupt
occurs. If ''Set OnTimer'' is ''Off'', then the ISR will not be executed when the
interrupt occurs. See also the ''On Timer'' command.


[[cubloc:index#system_library:|Go CUBLOC home]]