====== Use the CUWIN as an IntelliLCD ======

The IntelliLCD is a specialized firmware created by COMFILE Technology to make the CUWIN operate as a serial display.

  - Download the IntelliLCD firmware from https://www.comfiletech.com/pages/support.html Legacy Products field.
  - Extract the file to your PC.
  - Navigate to the extracted location and open the "Firmware" folder.  Inside you will find a *.dat file.
  - Create a "\Flash Disk\AutoRun" folder on the CUWIN.
  - Copy the *.dat file to the AutoRun folder.
  - Rename the "dat" file extension to "exe". 
  - Create a file named "UserConfig.ini" with the following contents.  Change the BaudRate option to 1, 2, 3, or 4 corresponding to 9600, 19200, 38400, and 115200 respectively. <code>
[Comm] 
Baudrate=4 
</code>
  - Copy the "UserConfig.ini" file to the CUWIN's "\Flash Disk" folder 
  - On the right side of the CUWIN, locate the 6-position dip switch, and set it to enable "Auto Run" mode.  
    - 5000/6000/CWA Series: 1-On, 2-On, the rest Off
    - CWV Series: 2-On, the rest Off
  - Reboot the CUWIN it will start in IntelliLCD mode.