jpc:boot_device:index
This is an old revision of the document!
Setting the jPC's Boot Device
The jPC can be configured to boot from the internal eMMC, a USB drive, or internal NVME drive mounted in the jPC's M.2 port. The boot device is selected using the 2-position DIP switch next to the power connector.
| DIP Switch Position | ||
|---|---|---|
| 1 | 2 | Description |
| OFF | OFF | Boots from the internal eMMC |
| ON | OFF | Boots from a USB Drive |
| OFF | ON | Boots from the internal NVME Drive |
| ON | ON | Reserved |
jpc/boot_device/index.1771601855.txt.gz · Last modified: by 127.0.0.1