CFMEGA2 is an industrial controller based on the ATmega2560 microcontroller.
Memory: Flash 256 KB, SRAM 8 KB, EEPROM 4 KB.
Communication interfaces include 1 I2C port, 2 RS-232 ports, and 1 RS-485 port.
Analog inputs: 4 channels supporting 0–10 V and 4 channels supporting 0–20 mA.
Temperature sensing: 1 NTC input with a measurement range of −40 °C to 99 °C.
Interrupt inputs: 2 channels (5 V level).
GPIO: 8 pins (7 pins support PWM output).
Power supply: 12–24 VDC with approximately 0.5 W power consumption.
Operating temperature range: 0 °C to 60 °C.
CFMEGA1 is an industrial controller planned for release.
MCU: ATmega2560 (Flash 256 KB, SRAM 8 KB, EEPROM 4 KB).
Communication interfaces: 2 RS-232 ports.
Analog inputs: Not supported.
Temperature sensing (NTC): Not supported.
Interrupt inputs: Not supported.
GPIO: Not supported.
Power supply: 12–24 VDC.
Operating temperature range: 0 °C to 60 °C.
CFDI-16B is a digital input module with 16 channels designed for DC 24 V signals.
Each input channel is opto-coupler isolated.
Address range: 0 to 7.
Maximum modules per system: 8 (system limit is 16 total I/O modules).
Power consumption: approximately 0.25 W.
Category: Digital Input.
CFDO-16N is a digital output module with 16 NPN transistor outputs.
Output voltage range: DC 5 V to 24 V with a maximum current of 120 mA per channel.
Address range: 0 to 7 (shares address space with CFDO-8R).
Maximum modules per system: 8.
Power consumption: approximately 0.55 W.
Category: Digital Output.
CFDO-8R is a relay output module with 8 channels using dry-contact relays.
Rated switching voltage: 110 VAC to 240 VAC.
Address range: shared with CFDO-16N (no separate address block).
Maximum modules per system: 8.
Power consumption: approximately 0.25 W.
Category: Digital Output.
CFADC-A4L is an analog input module with 4 channels.
Input types: 0–20 mA or 0–10 VDC.
Resolution: 14.7-bit.
Address range: 0 to 3.
Maximum modules per system: 4.
Power consumption: approximately 0.075 W.
Category: Analog Input.
CFDAC-2V is an analog output module with 2 channels.
Output range: 0–10 VDC.
Resolution: 12-bit.
Address range: 0 to 7.
Maximum modules per system: 8.
Power consumption: approximately 0.05 W.
Category: Analog Output.
CFTC-1L is a thermocouple input module with 1 channel.
Measurement range: −50 °C to 500 °C.
Address range: 0 to 7.
Maximum modules per system: 8.
Power consumption: approximately 0.05 W.
Category: Analog Input.
고객 여러분께서 개발중이신 소스 코드는 기술지원 대상이 아닙니다. 이점 양해바랍니다. 기술문의의 대부분이 작성중인 소스코드에 대한 질문입니다. 저희가 귀하의 개발에 참여한적이 없으므로 그 내용에 대해 자세히 알고 있지 못합니다. 소스코드를 잠시 보고 전체 맥락을 이해하기에는 매우 어려운일이며, 시간과 노력이 필요합니다. 거의 새로운 시스템을 개발하는 수준의 집중력을 요하는 일입니다.
제품이 이상이 있다고 판단되시는 경우, 제품 자체를 저희 회사로 보내주시기 바랍니다. 저희가 만든 소스와 지그로 테스트 한뒤 이상 유무를 판단해서 이상이 발견된 경우 조치해드리고 있습니다.