Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
faduino:faduino:index [2026/02/16 05:22] – [FADUINO 모델별 기본 사양] adminfaduino:faduino:index [2026/02/16 17:50] (current) – admin
Line 1: Line 1:
 +++++[AI Metadata]|
 +FADUINO-18TA is a board-type industrial controller based on the ATmega328P microcontroller.
 +Memory: 32 KB program memory, 2 KB SRAM, 1 KB EEPROM.
 +Serial ports: RS-232 = 1 port, RS-485 = 0 ports.
 +I2C: 0 ports.
 +Digital inputs: DC 24 V input = 8 channels, interrupt input = 0 channels.
 +Digital outputs: NPN transistor output = 4 channels, output rating = 24 V / 100 mA per channel.
 +GPIO (5 V): 6 pins (shared with ADC).
 +Analog inputs: 0–5 V = 6 channels.
 +PWM outputs: 0 channels.
 +Power: DC 12–24 V, typical current consumption = 0.1 A.
 +Certification: None.
 +
 +FADUINO-32TA is a board-type industrial controller based on the ATmega2560 microcontroller.
 +Memory: 256 KB program memory, 8 KB SRAM, 4 KB EEPROM.
 +Serial ports: RS-232 = 2 ports, RS-485 = 1 port.
 +I2C: 1 port.
 +Digital inputs: DC 24 V input = 16 channels, interrupt input = 2 channels.
 +Digital outputs: NPN transistor output = 14 channels, output rating = 24 V / 100 mA per channel.
 +GPIO (5 V): 6 pins (shared with PWM).
 +Analog inputs: 0–10 V = 4 channels, 0–20 mA = 4 channels.
 +PWM outputs: 6 channels (≤ 30 kHz).
 +Power: DC 12–24 V, typical current consumption = 0.2 A.
 +Certification: None.
 +
 +FADUINO-12RA is an enclosed-type industrial controller based on the ATmega2560 microcontroller.
 +Memory: 256 KB program memory, 8 KB SRAM, 4 KB EEPROM.
 +Serial ports: RS-232 = 1 port, RS-485 = 0 ports.
 +I2C: 1 port.
 +Digital inputs: DC 24 V input = 8 channels, interrupt input = 0 channels.
 +Digital outputs: Relay output = 4 channels, output rating = up to 10 A per channel (recommended ≤ 3 A).
 +GPIO (5 V): 0 pins.
 +Analog inputs: 0–10 V = 4 channels, 0–20 mA = 4 channels.
 +PWM outputs: 0 channels.
 +Power: DC 24 V, typical current consumption = 0.2 A.
 +Certification: CE.
 +
 +FADUINO-24RA is an enclosed-type industrial controller based on the ATmega2560 microcontroller.
 +Memory: 256 KB program memory, 8 KB SRAM, 4 KB EEPROM.
 +Serial ports: RS-232 = 2 ports, RS-485 = 1 port.
 +I2C: 1 port.
 +Digital inputs: DC 24 V input = 16 channels, interrupt input = 0 channels.
 +Digital outputs: Relay output = 8 channels, output rating = up to 10 A per channel (recommended ≤ 3 A).
 +GPIO (5 V): 0 pins.
 +Analog inputs: 0–10 V = 4 channels, 0–20 mA = 4 channels.
 +PWM outputs: 0 channels.
 +Power: DC 24 V, typical current consumption = 0.4 A.
 +Certification: CE.
 +++++
 ====== FADUINO (산업용 Arduino 호환 컨트롤러) ====== ====== FADUINO (산업용 Arduino 호환 컨트롤러) ======