User Tools

Site Tools



Set OnInt

Set OnIntx On|Off

x 0 to 3, External interrupt channel

At power on, Set OnIntx is On by default.

This command turns on or off the ability to receive individual external interrupts. x corresponds to the interrupt number supported by the device. For example OnInt1 is used for interrupt 1.

When Set OnIntx is On for a specific interrupt, the interrupt service routine (ISR) set using the On Intx command will be executed when the corresponding interrupt occurs. If Set OnIntx is Off, then the ISR will not be executed when the corresponding external interrupt occurs. See also the Set Intx command which controls external interrupts.

Set OnInt0 On
Set OnInt1 On
Set OnInt1 Off
Set OnInt2 Off
Set OnInt3 On

Go CUBLOC home

cubloc/set_onint/index.txt · Last modified: 2016/04/14 11:07 (external edit)